REQUEST GAMRY QUOTE

Reference Electrodes

Reference electrodes are critical to acquiring good electrochemical data. Drift in the reference electrode potential can cause quantitative and qualitative errors in data collection and analysis beyond simple inaccuracies in the measured potential. High performance potentiostats can also be susceptible to instability if the reference electrode impedance is too high.

IMX8 Electrochemical Multiplexer

The IMX8 Electrochemical Multiplexer is an affordable way to expand the throughput of your lab. Experiments can be sequentially multiplexed on up to 8 channels. The IMX8 is ideal for corrosion inhibitor testing, EIS evaluation of paints/coatings, monitoring of field probes for corrosion tests, and chemical sensor development. Click for PDF brochure

Faraday Shield

Gamry’s Faraday Shield provides effective shielding from environmental electronic noise allowing for high quality electrochemical measurements particularly at very low currents. A Conductive-glass Window door is optionally available for the Faraday Shield Click for PDF brochure

TDC5 Temperature Controller

The TDC5 Temperature Controller interfaces with your Gamry Potentiostat to control both heating and cooling processes required for Critical Pitting Temperature experiments.

eQCM 15M Quartz Crystal Microbalance

Gamry’s eQCM 15M is a rapid, impedance-scanning electrochemical quartz crystal microbalance (EQCM). The EQCM adds a valuable tool in the analytical toolbox of anyone investigating interfacial processes. Corrosion, ion intercalation, ion adsorption, polymer growth, and sensor binding events are all interfacial processes that produce mass changes. These mass changes can be measured by monitoring the resonant frequencies of an oscillating quartz crystal. Click for PDF brochure

Dye Solar Cell Testing

Intensity Modulated Photocurrent Spectroscopy and Intensity Modulated Photovoltage Spectroscopy are techniques that can be used to characterize Dye-Sensitized Solar Cells (DSSCs). Our system utilizes two Gamry potentiostats to fully characterize DSSCs, allowing you to extract recombination and charge-extraction parameters. Click for PDF brochure

PortHoles Electrochemical Sample Masks

PortHoles Electrochemical Sample Masks define a known area of the sample surface for electrochemical testing: 1, 3, or 10 cm2. They also serve to reduce crevice corrosion when samples are sealed to a cell with an O-ring, as with Gamry’s ParaCell and PTC1.