REQUEST GAMRY QUOTE

EIS300 Electrochemical Impedance Spectroscopy

EIS300 Electrochemical Impedance Spectroscopy Software is Gamry’s impedance spectroscopy package. EIS300 includes experimental scripts for potentiostatic, galvanostatic and hybrid impedance spectroscopy experiments in addition to single frequency techniques like Mott-Schottky. We also have our unique power-leveling multisine technique that improves signal-to-noise across the spectrum. On the analysis side, EIS300 provides tools for fitting spectra to equivalent circuit models, Kramers-Kronig transform for data validation and a graphical model editor. Our software even includes a script for EIS simulation. Click for PDF brochure

DC105 DC Corrosion

The DC105 DC Corrosion Techniques Software provides proven electrochemical techniques to investigate corrosion problems, extract mechanistic information, and predict long-term corrosion rates from an array of experiments. The DC105 runs standard DC corrosion tests such as polarization resistance, cyclic polarization, and galvanic corrosion in addition to a number of others. Click for PDF brochure

PHE200 Physical Electrochemistry

PHE200 Physical Electrochemistry Software is a researcher’s basic electrochemical toolkit. Techniques such as cyclic voltammetry, chronoamperometry, and chronopotentiometry are the foundation for basic research and are necessary in teaching, research, and industry. Click for PDF brochure

PWR800 Electrochemical Energy

The PWR800 Electrochemical Energy Software is a software package that allows researchers to test single-cells and stacks of variuos energy storage and conversion devices. The PWR800 includes charge, discharge, and cyclic charge-discharge techniques, as well as cyclic voltammetry. PWR800 optionally integrates with the EIS300 Electrochemical Impedance Spectroscopy package to add Impedance measurements into cyclic charge-discharge experiments. Click for PDF brochure

PV220 Pulse Voltammetry

The PV220 Pulse Voltammetry Software is an electroanalytical tool for performing a multitude of pulsed techniques involved in electrochemistry research. Pulsed techniques offer increased sensitivity for studying low concentration, fast timescale electroactive species. PV220 can be used with solid electrodes, rotating electrodes, and mercury electrodes. Click for PDF brochure

ESA410 Electrochemical Signal Analyzer

The ESA410 is designed specifically for the acquisition and analysis of time-dependent electrochemical noise signals. Cell voltage and current are continuously monitored at rates from 0.1 Hz to 1 kHz. An ESA410 system can be configured as a potentiostat, galvanostat or ZRA. A full featured set of analysis tools provides powerful analysis features such as statistical analysis, detrending, impedance spectra, and histogram analysis. Click for PDF brochure

EFM140 Electrochemical Frequency Modulation

The EFM140 Electrochemical Frequency Modulation software is a non-destructive corrosion rate measurement technique. It allows for measurement of the corrosion rate without prior knowledge of the Tafel constants. In addition, the technique determines the Tafel constants and provides 2 internal validity checks.

EN120 Electrochemical Noise

EN120 Electrochemical Noise Software is Gamry’s entry level software package for electrochemical noise testing. It is also an ECM8 Multiplexer compatible electrochemical noise software package. EN120 includes experimental scripts and analysis macros for ZRA mode, galvanostatic, and potentiostatic noise experiments. Click for PDF brochure

VFP600 Virtual Front Panel

The VFP600 Virtual Front Panel is a software-based front panel for Gamry Potentiostats. VFP600 will give you quick access to the potentiostat’s functionality, much like front panel interface of an early analog potentiostat, and allow you to perform simple electrochemical experiments. Click for PDF brochure

CPT110 Critical Pitting Temperature

The CPT110 Critical Pitting Temperature Software controls a Gamry Potentiostat, TDC4 Temperature Controller, and associated accessories to automatically measure the Critical Pitting Temperature of a material. Applications for the CPT110 include materials selection in the chemical process industry, study of bio-implants, alloy ranking, or evaluating pitting inhibitors. Click for PDF brochure

Echem Toolkit (Basic, DC, and AC)

Some users develop software to control a complex system where the operation of a Gamry instrument is only one subset of that system. Using a programming environment like National Instruments LabVIEW™ (Version 9 or newer), users can combine data taken from their Gamry instrument with that taken from other manufacturers’ instruments and data acquisition cards. Gamry’s eChem Toolkits offer users the ability to fully customize and integrate the control of a Gamry instrument into their own software system. These toolkits do not limit our users to using LabVIEW, however. Rather they can work with any programming language that utilizes a Component Object Model (COM).

DigiElch Electrochemical Simulation Software

DigiElch 7 from ElchSoft is an electrochemical simulation program for a wide variety of systems involving charge transfer reactions, adsorption, and charge-coupled chemical reactions such as proton coupled electron transfer (PCET). A demonstration version of DigiElch 7 is available. Click for PDF brochure